Glass cutting tables

Glass cutting tables manufactured by Expoglass are machines which support manual glass cutting.

Gallery


Description


The basic function of all glass cutting tables is to make operation of loading the glass safe and convenient. Glass sheets, because of their fragility, have to be handled in a vertical orientation, otherwise they could break under their own weight. In order to be able to put the sheets on the table safely and comfortably, it is enough to pull out the loading brackets from the table top, tilt the table top to an inclined position (approximately 80 degrees) and place the sheet on the brackets. After these operations ...

CATALOG


Data sheet containing basic technical data of the product.

High safety of operation

Increase of efficiency and reduction of the number of operators

Less material loss

The purpose of use

Expoglass glass cutting table is a machine which makes operation of glass cutting: easier, faster and safer.  Usually it also reduces the number of necessary operators during the glass cutting process. The main three features which helps in glass cutting are: tilted top, breaking bars and air cushion system.

Loading the glass
The basic function of all glass cutting tables is to enable safe and convenient glass loading. Glass sheets, should be handled in a vertical orientation, otherwise they could break under their own weight. In our tables, in order to be able to put the sheets on the table safely and comfortably, it is enough to pull out the loading cantilevers from the table top, tilt the table top to an inclined position and place the panes on the brackets.

Breaking the glass
Breaking bars greatly improve the glass breaking process. After scoring the glass, it is enough to set the surface in such a way that the score is located above the bar and press the pedal under the table. Pressing the pedal causes the breaking bar to lift, pushing from the bottom along the score on the glass and the material breaks under its own weight. Depending on the orientation in which we cut the glass, we can use breakers - longitudinal or transversal.

Manipulating large and / or heavy panels

While manipulating large and / or thick glass sheets, large friction is generated on the worktop surface. This phenomenon makes it difficult for the operator to work, and in some cases may unable the operator to operate alone. An additional risk is scratching of the glass at the moment when there are pieces of glass or other dirt on the table. The occurrence of these problems can be minimized by using an aircushion system.

Expoglass glass cutting tables are machines supporting manual glass cutting which are produced in three basic sizes:

  • Small        – dimensions of the top – 1860 mm x 2800 mm
  • Medium – dimensions of the top – 2400 mm x 3400 mm
  • Big            –  dimensions of the top – 2600 mm x 3400 mm

BASIC VERSION
Expoglass glass cutting tables are manufactured in two types: basic (tilted manually without additional equipment) and equiped

Equipment installed in the basic version is listed below:
Tilting of the top                                              - manual
Support of tilting                                             - by two gas springs
Pull-out cantilevers for glass loading  - yes, manually
Covering of the top                                        - grey felt
Covering of the circumference               - ash slats
Wheels                                                                  - 4 rotary, with increased load
Levelling feet                                                     - 4 pieces installed
Steel construction covering                     - polyurethane covering

Our tables can be equiped with 3 additional modules listed below:
  • Pneumatical tilting of the top
  • Breaking bars
  • Air cushion system
 

The above description and photos are the property of Expoglass company. Therefore, it is prohibited to copy, redistribute, publish, distribute, share or use in any other way all or part of the content located on the website www.expoglass.pl